Temperature Control - Schneider BMS Cables

Summary: Temperature Control - Schneider BMS Cables

Temperature Control — Schneider BMS Cables

Windy City Wire manufactures SmartWire® low-voltage temperature control wire and cable for reliable, code-compliant performance in Schneider BMS environments. From field controllers and actuators to sensors and zone buses, our plenum-rated constructions support clean signals and stable power for building automation networks, including applications that utilize Bacnet, Lon, and Echelon protocols. Every SmartWire cable is made in the United States and designed to help contractors install faster, pull with less effort, and standardize projects across facilities.

SmartWire is our brand of low-voltage cable—part of a complete solution that focuses on safety, consistency, and labor savings on every job. For temperature control and BMS communications, you’ll find options in multiple gauges, conductor counts, and shielding styles to match control loops, I/O wiring, sensor lines, and twisted-pair communications.

• Built for BMS reliability: Plenum (CMP) constructions for use in environmental air spaces and consistent signal integrity for controls and communications.
• Communication-ready choices: Low-capacitance, pair-shielded options for zone bus/comm lines used with Bacnet-, Lon-, and Echelon-based systems.
• Shielding where you need it: Non-shielded, overall shielded, and each-pair shielded (EPS) selections help manage noise in demanding mechanical rooms and risers.
• Easier pulls: SmartWire Glide lubrication is applied during manufacturing to reduce friction up to 70% for smoother, cleaner installations—at no additional cost.
• Jobsite standardization: Broad conductor color code options and custom jacket/stripe color capabilities help teams quickly identify circuits and maintain consistent standards across projects.
• Compliance minded: UL-listed CMP plenum offerings, with CL3P/CMP where specified, and RoHS compliance.
• Made to fit the plan: Available gauges: 16, 18, 22, 23, 24 AWG; lengths offered: 500, 1000, and 2500 FT.

Available constructions

• 16 AWG 2 Conductor Stranded Bare Copper Plenum (CMP) UL 444: Unshielded two-conductor control cable for thermostat power/control and actuator runs in plenum spaces.
• 18 AWG 2 Conductor Stranded Bare Copper Plenum (CMP) UL 444: Unshielded two-conductor choice for general temperature control loops, sensors, and I/O.
• 18 AWG 3 Conductor Stranded Bare Copper Plenum (CMP) UL 444: Unshielded three-conductor option for combined control/power and return signal needs.
• 18 AWG 4 Conductor Stranded Bare Copper Plenum (CMP) UL 444: Unshielded four-conductor construction for multi-point devices and shared returns.
• 18 AWG 6 Conductor Stranded Bare Copper Plenum (CMP) UL 444: Unshielded six-conductor bundle for dense control terminations and multi-signal devices.
• 18 AWG 2 Conductor Stranded Bare Copper Plenum (CMP) UL 444: Shielded version to reduce EMI in noisy mechanical spaces and near VFDs.
• 18 AWG 3 Conductor Stranded Bare Copper Plenum (CMP) UL 444: Shielded three-conductor for cleaner analog signals and stable control feedback.
• 18 AWG 4 Conductor Stranded Bare Copper Plenum (CMP) UL 444: Shielded four-conductor for critical sensor lines and low-noise control circuits.
• 18 AWG 6 Conductor Stranded Bare Copper Plenum (CMP) UL 444: Shielded six-conductor for consolidated multi-signal runs with added noise protection.
• 24 AWG 1 Pair Solid Tinned Copper Plenum (CL3P/CMP) 300V: Low-capacitance, shielded pair (EPS) for zone bus/communication links requiring tighter electrical performance.
• 24 AWG 2 Pair Solid Tinned Copper Plenum (CL3P/CMP) 300V: Two shielded low-capacitance pairs (EPS) for multi-drop bus segments and controller networks.
• 22 AWG 1 Pair Stranded Bare Copper Plenum (CMP) UL 444: Unshielded pair for general sensor and control circuits where shielding is not required.
• 22 AWG 2 Pair Stranded Bare Copper Plenum (CMP) UL 444: Unshielded two-pair for multi-point sensor lines and shared loop wiring.
• 23 AWG 4 Pair Solid Bare Copper Plenum (CMP) UL 444: Category 6 UTP for controller-to-switch connections and BMS backbone segments within the plenum.

Options and selection guidance

• Shielding: Non-Shielded, Shielded, and Each-Pair Shielded (EPS) to match the noise environment and run length.
• Conductor color codes: Black/White; Black/White/Red; Black/White/Red/Green; Black/White/Red/Green/Brown/Blue; White-Blue/Blue; White-Orange/Orange; White-Blue/Blue.
• Lengths: 500, 1000, and 2500 FT to align with project takeoffs and reduce excess on site.

How Windy City Wire adds value to Schneider BMS projects

• Purpose-built for building automation: A focused selection of temperature control wire and cable that covers power limited controls, zone buses, and device wiring for Schneider BMS.
• Product consistency from design to closeout: CMP plenum compliance across constructions, with low-cap choices for Bacnet, Lon, and Echelon communication paths.
• Installation efficiency: SmartWire Glide lubrication helps reduce pull tension and rework, supporting faster, cleaner installations in congested pathways.
• Standardization: Color code options and availability across 16, 18, 22, 23, and 24 AWG let teams standardize details across multiple facilities.
• U.S. manufacturing and quality: SmartWire is manufactured in the United States and RoHS compliant for dependable performance and specification confidence.

Summary
Windy City Wire’s SmartWire temperature control offerings for Schneider BMS provide a clear, dependable path from submittal to final connections. With plenum-rated constructions, low-cap EPS pairs for communications, multiple gauges, and available lengths, installers can match cable to application—whether it’s controller I/O, sensor feeds, or network bus segments used with Bacnet, Lon, or Echelon systems. Choose SmartWire to streamline your next project with consistent, low-voltage products and a selection that helps keep jobs on schedule and within scope.

Solutions: Temperature Control - Schneider BMS Cables

Temperature Control – Schneider BMS Cables

Windy City Wire supplies plenum-rated temperature control wire and cable designed for modern Building Management Systems. These constructions support Schneider Electric BMS platforms and integrate cleanly with common control ecosystems and protocols, including Bacnet, Lon, and Echelon-based networks used by Trane, Honeywell, Alerton, and many others. From sensor loops and actuator power to controller trunks and IP backbones, our portfolio helps consulting engineers, contractors, and facility teams standardize on reliable, code-compliant choices for HVAC and automation.

Where these cables fit in your BMS

• Schneider Electric EcoStruxure Building Operation and legacy I/A, TAC, and Andover Continuum controllers
• Trane Tracer, Honeywell (e.g., Spyder/Excel), and Alerton systems on Bacnet MS/TP and Lon networks
• Johnson Controls, Siemens, Distech, Delta Controls, KMC, Carrier, and other open-protocol installations
• Applications: zone sensors and wall modules, VAV boxes, damper and valve actuators, thermostats, RTUs/AHUs, boilers/chillers, VFD interfaces, gateways, and supervisory controllers

Protocol-friendly performance

• Bacnet MS/TP (RS‑485): Shielded plenum twisted pair options help maintain signal integrity, especially on longer trunks or in electrically noisy spaces.
• Lon/Echelon (FT‑10 and similar): Low-capacitance, plenum-rated pairs support stable free-topology networks; individually shielded pairs are available for tighter noise control and pair-to-pair isolation.
• IP and controller backbones: Category 6, 23 AWG 4-pair constructions support Ethernet segments used by BMS servers, IP-based controllers, and edge devices.
• Analog/digital I/O, power, and control: 16 and 18 AWG multi-conductor choices provide dependable runs for actuators, relays, economizers, and sensor circuits in temperature control applications.

Construction options that match the job

• AWG range: 16, 18, 22, 24, and 23 AWG options cover power-hungry actuators, multi-signal control, and long-distance communication pairs.
• Conductor counts: From 1–2 pair data cables to 2, 3, 4, and 6 conductor control cables for thermostats, wall modules, and actuator bundles.
• Shielding choices: Non-Shielded for simple sensor loops in quiet spaces; Shielded for RS‑485 trunks or areas near VFDs and switchgear; EPS (each pair shielded) to reduce pair-to-pair crosstalk on multi-pair data runs.
• Low-capacitance pairs: Select low-cap 24 AWG shielded pairs for long Lon/Echelon or Bacnet MS/TP runs to help maintain bandwidth and minimize attenuation.
• Compliance: UL Subject 444, Type CL3P/CMP plenum listings and RoHS compliance support use in return-air spaces and across projects with strict environmental and safety requirements.
• Color identification: Multiple conductor color codes are available to simplify termination and service across device types and zones.

How to choose the right temperature control wire and cable

1. Match the protocol
   - Bacnet MS/TP trunks: use shielded twisted pair, consider low-capacitance for longer distances.
   - Lon/Echelon FT‑10: twisted pair in plenum spaces; add EPS when multiple pairs share a sheath or when EMI is a concern.
   - Ethernet/IP controllers: choose Category 6, 23 AWG 4-pair for supervisory networks and IP room devices.
2. Size for load and distance
   - 16 AWG 2-conductor is well-suited for actuator power and longer control runs.
   - 18 AWG 2–6 conductor covers most thermostat, sensor, and actuator applications.
   - 22–24 AWG pairs serve communication lines and low-current sensor loops.
3. Plan for the environment
   - Plenum-rated CMP/CL3P lets you run in return-air spaces without additional consideration.
   - Use shielding in mechanical rooms, near VFDs, generators, elevator equipment, or dense electrical spaces.
4. Coordinate with system requirements
   - Schneider BMS, Trane, Honeywell, Alerton, and similar systems may publish cable specs by topology; our range aligns with these common guidelines while keeping procurement straightforward.

Industries and facilities served

• Commercial offices and mixed-use buildings
• Healthcare and life sciences, including critical environments
• K‑12 and higher education campuses
• Hospitality, retail, and multi-family
• Industrial plants, warehouses, and logistics centers
• Data centers and technology facilities
• Government and municipal buildings

Typical use cases by system area

• VAV networks: Bacnet MS/TP trunks with shielded twisted pair; 18 AWG multi-conductor for actuator and reheat control inside the zone.
• Mechanical rooms: 16 AWG 2-conductor to valves and dampers; shielded communication pairs to RTUs, boilers, chillers, and VFDs.
• Space controls: 18 or 22 AWG to thermostats and wall modules, with additional conductors for occupancy, humidity, and CO2 inputs.
• Backbone and integration: 24 AWG low-cap shielded pairs for field buses; 23 AWG Cat 6 for controller-to-switch connections and BMS servers.

Availability

• Lengths: 500, 1000, and 2500 ft options, depending on the specific construction.
• Shielding: Non-Shielded, Shielded, and EPS configurations.
• Conductor color code options support clear, consistent terminations across devices and zones.

Whether you are wiring Schneider controllers on Bacnet MS/TP, integrating Lon/Echelon devices on an existing loop, or extending an IP backbone for supervisory control, our temperature control wire and cable portfolio delivers code-compliant, plenum-rated choices that align with common submittal requirements and jobsite realities. The result is predictable installation, stable communications, and easier maintenance across the life of the building.

Frequently Asked Questions: Temperature Control - Schneider BMS Cables

• What AWG conductors are available with these SmartWire Temperature Control Schneider BMS cables?

  Available gauges include 16 AWG, 18 AWG, 24 AWG, 22 AWG, and 23 AWG.

• What other colors are these SmartWire Temperature Control Schneider BMS cables available in?

  Available color codes: Black/White; Black/White/Red; Black/White/Red/Green; Black/White/Red/Green/Brown/Blue; White-Blue/Blue; White-Orange/Orange.

  Custom SmartWire jacket and stripe color combinations are also available to standardize your installations.

• Are these SmartWire Temperature Control Schneider BMS cables made with solid or stranded copper conductors?

  These cables use copper conductors: stranded for the single- and multi-conductor temperature-control options, and solid for the 23 AWG 4‑pair Category 6 construction. Select 24 AWG low-cap shielded pairs utilize tinned copper conductors.

• What lengths are these SmartWire Temperature Control - Schneider BMS cables sold in?

  Windy City Wire manufactures and stocks SmartWire Temperature Control cable in 1,000 ft lengths as our standard. Additional lengths are available on select items: 500 ft and 2,500 ft.

• How is your SmartWire low-voltage Temperature Control cables sold on spools or in boxes?

  Our SmartWire Temperature Control wire is packaged and sold in our patented RackPack carton for fast, efficient pulls. Learn more about our RackPack (https://windycitywire.com/solutions/rackpack-overview).

Additional Links:

• Learn more about our SmartWire Cable
• The RackPack - Our patented cable delivery solution
• Our Transporters - RackPack Transportation Devices
• 19 Stocking Locations Nationwide - Find a Branch near you