JavaScript is required to use the Windy City Wire site

Security & Access Control Multi-Conductor Composite Non-Plenum 4-Element Non-Jacketed (Construction 2 Inverse 2) Cables

About this category

Summary: Security & Access Control Multi-Conductor Composite Non-Plenum 4-Element Non-Jacketed (Construction 2 Inverse 2) Cables

Security & Access Control Multi‑Conductor Composite Non‑Plenum 4‑Element Non‑Jacketed (Construction 2 Inverse 2)

Windy City Wire manufactures SmartWire® low‑voltage cable solutions that help security professionals deliver consistent results on schedule. This non‑plenum, four‑element composite bundles the circuits typically required at a door opening into a single pull, combining power and reader/data elements while keeping each cable individually jacketed for clean terminations and faster device hookups.

Built for commercial access control environments, this non‑jacketed composite pairs unshielded power/control with shielded reader/data to balance current delivery and noise mitigation. The stranded copper construction supports flexible routing in tight spaces, and the PVC jackets with distinct stripe colors simplify identification at panels and doors. SmartWire Glide Technology® lubrication is applied during manufacturing to reduce friction during pulls by up to 70%.

  • Single‑pull efficiency: Composite assembly includes two 18 AWG unshielded 4‑conductor elements and two 22 AWG overall‑shielded 3‑pair elements for typical door openings.
  • Non‑jacketed composite design: Each element retains its own jacket and color stripe, making breakout, dressing, and termination straightforward without stripping an overall jacket.
  • Signal integrity where it matters: OAS on reader/data pairs helps reject EMI near electrified hardware; unshielded power/control supports reliable lock power delivery.
  • Flexible installation: Stranded conductors aid pulls through conduit and bends; PVC non‑plenum construction is suited for general‑purpose spaces.
  • SmartWire manufacturing: Made in the United States and supplied with SmartWire Glide Technology® lubrication as a standard feature to make pulls more efficient.
  • Visual identification in the field: Gray jackets with distinct stripe colors support clear circuit recognition at the headend and the opening.
  • Customization options: SmartWire jacket and stripe colors can be customized to align with your organization’s standards. Contact Windy City Wire for details.

Typical uses

  • Electrified locks, mag locks, and strikes (power/control)
  • Proximity/smart card readers, keypads, and door position/REX where shielded pairs are preferred
  • Single‑ and multi‑door openings in access control systems for commercial and industrial facilities

Included element constructions in this composite

  • 18 AWG 4C UNS STR PVC 300V: Unshielded, stranded 4‑conductor element for lock power and control. Gray jacket with purple stripe; conductor color code: Black/Red/White/Green.
  • 22 AWG 3PR OAS STR PVC 300V: Overall‑shielded, stranded 3‑pair element for card reader/data circuits. Gray jacket with yellow stripe; pair color code: Black/Red, White/Green, Brown/Blue.

How this SmartWire solution adds value

  • Streamlines material planning by bundling the required access control circuits in one composite pull.
  • Reduces on‑site labor for dressing and termination with clearly identifiable elements and color coding.
  • Helps maintain reader/data performance with OAS while keeping power/control simple with UNS.
  • Supports consistent, repeatable installations across multiple openings and projects.

Choose SmartWire® composite low‑voltage cable from Windy City Wire for a reliable, installer‑friendly access control solution that consolidates circuits, enhances clarity at the opening, and supports efficient, professional results on every project.

Solutions: Security & Access Control Multi-Conductor Composite Non-Plenum 4-Element Non-Jacketed (Construction 2 Inverse 2) Cables

Security & Access Control Multi‑Conductor Composite, Non‑Plenum, 4‑Element (Construction 2 Inverse 2)

These composite low‑voltage security cables are purpose‑built for door access control and related security devices, combining dedicated power and data elements into one pull. By bundling the conductors required for electric locks, card readers, request‑to‑exit (REX) devices, and monitoring contacts, this cable streamlines installation, reduces terminations, and supports clean, standards‑aligned wiring practices across new construction, tenant improvements, and retrofit projects.

What’s inside and why it matters

  • Mixed gauges for the job at hand: dedicated 18 AWG conductors for lock power and control, paired with 22 AWG signal pairs for reader/data circuits. This helps minimize voltage drop to strikes and maglocks while preserving signal integrity for OSDP/RS‑485 and Wiegand communications.
  • Targeted shielding where it counts: OAS (Overall Aluminum Shield) on the reader/data element helps reject EMI/RFI from motors, VFDs, elevators, and other noise sources common in commercial and industrial facilities; unshielded (UNS) power elements remain flexible and efficient for higher‑current door hardware.
  • Non‑plenum composite, non‑jacketed bundle: individually jacketed elements are grouped for a single, efficient pull, then quickly fanned out at the opening to terminate on different devices and terminals without extra splices or transition points.
  • Clear conductor color coding for fast terminations and service:
    • Power/control element: Black/Red/White/Green
    • Reader/data element (3 pairs): Black/Red, White/Green, Brown/Blue

Typical door and opening applications

  • Credential readers: Wiegand or OSDP‑based readers, keypads, and multi‑technology readers using the shielded 22 AWG pairs for data and control.
  • Electric locks and door hardware: maglocks, electric strikes, electrified levers/mortise locks, shear locks, gate operators, and cabinet/IT rack locks powered and controlled over the 18 AWG conductors.
  • Door monitoring and egress: door position switches (DPS), REX PIR sensors, REX push buttons, latch bolt/guard bolt monitors, and tamper switches using spare 22 AWG pairs.
  • Annunciation and control: panel outputs for LEDs, buzzers, and relays at the opening.

System integrations supported

  • Access control panels and controllers: home runs to panel enclosures or distributed/edge controllers, supporting both Wiegand and OSDP/RS‑485 reader interfaces.
  • Power and control equipment: UL‑listed access power supplies, relay modules, request‑to‑exit logic, and door control/IO modules.
  • Intrusion and video coordination: door contacts and REX tie‑ins to intrusion panels; relay control for video door stations and intercom door releases.
  • Specialty entry points: turnstiles, mantraps/interlocks, overhead/roll‑up doors, gates, parking arms, and elevator access interfaces where combined power and data simplifies conduit fill and routing.
  • Building systems: dry‑contact monitoring and control points for building automation where shielded signal pairs and power conductors must travel together.

Industries and environments

  • Commercial offices and corporate campuses
  • Healthcare facilities, clinics, and labs (general, non‑plenum spaces)
  • Education: K‑12, higher education, and research buildings
  • Industrial and manufacturing plants with high electrical noise
  • Warehousing, logistics, and distribution centers
  • Retail, mixed‑use, and hospitality properties
  • Financial services, government, and municipal buildings
  • Transportation, utilities, and critical infrastructure sites
  • Data centers and technology campuses

Key advantages for contractors and integrators

  • One cable, complete door: fewer pulls, faster terminations, reduced change‑order risk, and lower total installed cost compared with multiple single‑purpose cables.
  • Performance by design: OAS shielding on the signal element helps maintain stable OSDP/RS‑485 communications; twisted signal pairs support common access control protocols; 18 AWG power conductors help mitigate voltage drop on longer runs and higher‑load devices.
  • Cleaner installations: non‑jacketed composite format makes it easy to separate elements at device locations, manage slack, and land conductors exactly where needed.
  • Serviceability: organized, color‑coded conductors speed up troubleshooting and future device upgrades at the opening.

Use cases at scale

  • Standard single‑door openings: pair the 18 AWG element with the electric strike or maglock and use the shielded 22 AWG pairs for the reader, DPS, and REX.
  • Multi‑device openings: add keypads, request‑to‑exit sensors, or indicator/buzzer functions using spare pairs without pulling additional cable.
  • Perimeter and high‑EMI areas: rely on the OAS‑shielded reader element to improve noise immunity near loading docks, production floors, or mechanical spaces.
  • Retrofit projects: composite format reduces conduit fill and saves time when replacing legacy hardware with OSDP‑capable devices.

Shielding, gauges, and color coding

  • Available shielding: OAS/UNS combination within the composite bundle supports both noise‑sensitive data and robust power circuits.
  • Multiple gauges present: 18 AWG for power/control and 22 AWG for reader/data pairs within the same cable for balanced performance at the door.
  • Conductor jacket colors: Black/Red/White/Green for the 18 AWG element; Black/Red, White/Green, Brown/Blue for the 22 AWG 3‑pair element to simplify identification during terminations and service.

Planning and installation notes

  • Non‑plenum rating: install in general‑purpose spaces per local code. Where plenum environments are present, select a plenum‑rated alternative.
  • Protocol alignment: use the shielded 22 AWG pairs for OSDP/RS‑485 or Wiegand signals; follow manufacturer guidance on maximum run lengths and grounding practices.
  • Grounding: terminate the OAS shield/drain per controller recommendations (often at one end only) to minimize ground loops.
  • Power sizing: confirm device current draw and run length to validate 18 AWG sizing and acceptable voltage drop.
  • Segregation: maintain best practices for separation from high‑voltage conductors to reduce inductive coupling and noise.

Where this composite cable fits in your security design

From card readers and electric door hardware to REX sensors and door monitoring, this multi‑conductor composite security cable delivers a straightforward, low‑voltage wiring path that aligns with modern access control architectures. It helps standardize your door kit, supports both Wiegand and OSDP, and simplifies deployment across large campuses and multi‑site portfolios—ultimately reducing labor, improving consistency, and supporting reliable long‑term operation.

Frequently Asked Questions: Security & Access Control Multi-Conductor Composite Non-Plenum 4-Element Non-Jacketed (Construction 2 Inverse 2) Cables

  • 1. What AWG conductors are available with this SmartWire Security & Access Control Multi-Conductor Composite Non-Plenum 4-Element Non-Jacketed (Construction 2 Inverse 2) Cables cable?

    This composite features multiple elements with two AWG sizes: 18 AWG (18-4 UNS) and 22 AWG (22-3P OAS), both with stranded copper conductors.

  • 2. What other colors is this SmartWire Security & Access Control Multi-Conductor Composite Non-Plenum 4-Element Non-Jacketed (Construction 2 Inverse 2) Cables cable available in?

    Available conductor identification colors include: Black/Red/White/Green, Black/Red, White/Green, Brown/Blue, Black/Red.

  • 3. Is this SmartWire Security & Access Control Multi-Conductor Composite Non-Plenum 4-Element Non-Jacketed (Construction 2 Inverse 2) Cables cable made with solid or stranded copper conductors?

    Stranded copper conductors.

  • 4. What length is this SmartWire Security & Access Control Multi-Conductor Composite Non-Plenum 4-Element Non-Jacketed (Construction 2 Inverse 2) Cables cable sold in?

    1,000 ft. At Windy City Wire we manufacture and stock SmartWire Security & Access Control cable in 1,000 ft lengths as our standard. SmartWire cables come standard with SmartWire Glide lubrication to reduce pulling friction, and include FastFIND Footage Markers to simplify footage calculations and help reduce waste.

  • 6. What are some distinctions between BAC NET, RS232 and RS485 Cables?

    BACnet is a building automation protocol that commonly runs over RS-485 (BACnet MS/TP) or Ethernet/IP; for MS/TP, a shielded twisted pair (often 22 AWG) is typical. RS-232 is a single-ended, point-to-point interface suited for short runs (generally up to ~50 ft), often using 3–5 conductors and not requiring twisted pairs. RS-485 is a balanced, differential, multi-drop bus that supports longer distances (up to thousands of feet) and multiple devices on one pair; it typically uses one or two twisted pairs with an overall shield for noise immunity.

Summary: Security & Access Control Multi-Conductor Composite Non-Plenum 4-Element Non-Jacketed (Construction 2 Inverse 2) Cables

Security & Access Control Multi‑Conductor Composite Non‑Plenum 4‑Element Non‑Jacketed (Construction 2 Inverse 2)

Windy City Wire manufactures SmartWire® low‑voltage cable solutions that help security professionals deliver consistent results on schedule. This non‑plenum, four‑element composite bundles the circuits typically required at a door opening into a single pull, combining power and reader/data elements while keeping each cable individually jacketed for clean terminations and faster device hookups.

Tip: Use the product search in our header to find additional products not featured in this catalog
Updating products…