JavaScript is required to use the Windy City Wire site

SmartFIBER Multimode 50/125

About this category

Summary: SmartFIBER Multimode 50/125

SmartFIBER Multimode 50/125 (OM3) — Built for Commercial and Industrial Performance

Windy City Wire manufactures SmartWire® low-voltage fiber optic cable in the United States for B2B customers who need reliable, repeatable results on every job. Our SmartFIBER Multimode 50/125 OM3 plenum distribution cables are designed for enterprise backbones, telecom rooms, security and building systems, and A/V infrastructure where consistent performance, clear identification, and installation efficiency matter.

As a manufacturer focused on products and solutions, we back our fiber offering with features that support faster installs and lower total project cost. SmartWire Glide lubrication is applied during manufacturing to reduce pull friction by up to 70%, helping teams move faster through conduit and crowded pathways. FastFIND Footage Markers make it easy to plan runs, track remaining footage, and reduce leftover scrap—customers regularly see 15–25% less waste. If your projects require standardization and easy field identification, we also offer custom jacket and stripe color options across many SmartWire cable families.

Why choose SmartFIBER Multimode 50/125 OM3 for your next project?

  • OM3 multimode fiber for high-bandwidth enterprise links across campuses, offices, healthcare, education, and industrial facilities.
  • Indoor/outdoor plenum distribution design supports unified routing from spaces to pathways while meeting plenum environment requirements.
  • Aqua jacket for quick OM3 identification across your fiber infrastructure.
  • Non-shielded, all-dielectric construction for simple separation from electrical systems and ease of handling.
  • SmartWire Glide lubrication reduces friction during pulls to help minimize labor time and rework.
  • FastFIND Footage Markers support accurate measurements, easier planning, and reduced product waste.
  • Made in the USA with consistent quality and B2B-focused support for contractors, integrators, and facility teams.
  • Custom jacket and stripe color options available to align with your organization’s standards and simplify identification in the field.

Applications

  • MDF–IDF backbones and cross-connects
  • Enterprise LAN and data links for 1/10 Gb systems (OM3)
  • Security and surveillance networks
  • Pro A/V distribution and control systems
  • Building automation and industrial communications

Available Constructions — SmartFIBER Multimode 50/125 OM3

  • Distribution 4 Fiber 50/125µm OM3 Ultra-Fox™ — Aqua Jacket: Compact plenum indoor/outdoor distribution cable for short backbones and device uplinks where only a few strands are required. Non-shielded design simplifies routing and termination.
  • Distribution 6 Fiber 50/125µm OM3 Ultra-Fox™ — Aqua Jacket: A balanced strand count for small to mid-size IDF links and security or A/V runs with room for growth. Plenum indoor/outdoor rating supports unified pathways across environments.
  • Distribution 12 Fiber 50/125µm OM3 Ultra-Fox™ — Aqua Jacket: Higher density option for backbone and aggregation points requiring multiple active and spare strands. Non-shielded, plenum indoor/outdoor construction supports scalable enterprise deployments.

How Windy City Wire adds value

  • Consistent, US-manufactured SmartWire quality with a B2B focus on commercial and industrial jobs.
  • Features that support faster, cleaner installs: SmartWire Glide lubrication and FastFIND Footage Markers.
  • A comprehensive product and accessory offering to complete your fiber pathway, including connectors, adapter plates, patch cords, and enclosure options.
  • Custom color options to standardize your installations and speed on-site identification.

Whether you are building a new backbone, expanding campus connectivity, or standardizing across multiple facilities, SmartFIBER Multimode 50/125 OM3 distribution cables provide dependable performance with practical features that help keep projects on schedule and within budget. Contact Windy City Wire to configure the right product and accessories for your next low-voltage fiber deployment.

Solutions: SmartFIBER Multimode 50/125

SmartFIBER Multimode 50/125 (OM3) — Indoor/Outdoor Plenum Distribution Cable

Windy City Wire’s SmartFIBER Multimode 50/125 OM3 distribution cables are built for commercial and industrial environments that demand dependable, high‑bandwidth pathways between network hubs, telecom rooms, and critical systems. The line is available in 4‑, 6‑, and 12‑fiber constructions, using OM3 Ultra‑Fox tight‑buffered fibers under an aqua plenum jacket. The design supports efficient installation inside plenum spaces with the flexibility to extend through protected outdoor pathways, making it a practical choice for campus and building backbones.

Construction highlights

  • OM3 50/125 µm multimode performance for enterprise backbones and short‑to‑medium reach aggregation links.
  • Distribution cable design with tight‑buffered fibers for straightforward fan‑out and termination in patch panels and enclosures.
  • Non‑shielded, dielectric structure that eliminates grounding requirements and reduces pathway constraints.
  • Aqua jacket color for fast identification of OM3 multimode infrastructure in shared pathways and racks.
  • Available fiber counts: 4, 6, and 12 to right‑size each link and control material costs.

Where SmartFIBER OM3 fits in your network

  • Building and campus backbone links between MDF/IDF rooms, equipment rooms, and data halls.
  • Riser and plenum spaces where code requires plenum‑rated materials for air‑handling areas.
  • Conduit and innerduct pathways for protected outdoor transitions between buildings or structures.
  • Patch‑panel to patch‑panel runs in enterprise, healthcare, education, government, industrial, and retail environments.
  • Data center cross‑connects, aggregation links, and storage area network tie‑ins where OM3 is appropriate.

Typical systems and integrations supported

  • Enterprise networking: 1G/10G Ethernet distribution and aggregation; short‑reach 40G/100G where OM3 distances are suitable.
  • Security and surveillance backbones: IP video, access control, visitor management, and monitoring headends.
  • Wireless and mobility: backhaul to wireless controllers, WLAN aggregation, and small‑cell headend interconnects.
  • A/V over IP and control: signal transport between headends, control rooms, and distributed AV spaces.
  • Industrial and utility networks: controls, SCADA, process monitoring, and interbuilding communications in protected pathways.
  • Building automation: BMS/BAS supervisory links between mechanical rooms and network cores.

Industries that rely on SmartFIBER OM3

  • Commercial offices, multi‑tenant and corporate campuses.
  • Manufacturing, warehousing, and logistics facilities.
  • Healthcare systems, research labs, and life sciences.
  • Higher education and K‑12 campuses.
  • Government, public safety, and municipalities.
  • Hospitality, stadiums/venues, retail, and mixed‑use developments.
  • Transportation hubs and critical infrastructure sites.

Deployment and compatibility

  • Optimized for termination with common connector types, including LC and SC, via standard fan‑out kits and patch panels.
  • Suitable for ladder tray, basket tray, J‑hook, conduit, and innerduct pathways when installed per code and bend‑radius best practices.
  • Works with enterprise switches, media converters, and optics designed for OM3 multimode links.
  • Pair with SmartWire copper cabling on mixed‑media projects to build a cohesive fiber‑and‑copper infrastructure from the core to the edge.

Why contractors and integrators choose SmartFIBER OM3 distribution cables

  • Plenum rating supports use in air‑handling spaces while maintaining the flexibility to route through protected outdoor segments.
  • Tight‑buffered distribution design simplifies handling, fan‑out, and termination in crowded telecommunications spaces.
  • Multiple fiber counts (4, 6, 12) help align capacity with present needs and future growth without overbuilding.
  • Dielectric, non‑shielded construction reduces complexity in grounding and bonding.
  • Aqua jacket provides a clear visual cue for OM3 multimode identification across the site.

Example use cases

  1. MDF to IDF backbone linking core switches to edge closets across multiple floors.
  2. Interbuilding fiber between a main data center and an adjacent production or warehouse facility via conduit.
  3. Aggregation link from surveillance headend to campus security operations with room to expand from 4 to 12 fibers as cameras scale.
  4. Short‑reach 10G distribution from a data center aggregation switch to A/V control and collaboration spaces.
  5. BAS supervisory link connecting mechanical rooms back to the central network for monitoring and analytics.

Plan your next fiber run

Whether you are building a new backbone or extending capacity in existing pathways, SmartFIBER Multimode 50/125 OM3 distribution cables give contractors and facility teams a dependable, code‑aligned option for indoor and protected outdoor routes. Contact Windy City Wire to align fiber counts, connectors, and accessories with your project’s distances, optics, and bandwidth roadmap.

Frequently Asked Questions: SmartFIBER Multimode 50/125

  • What constructions are available with this SmartWire SmartFIBER Multimode 50/125 cable?
    Indoor/Outdoor Plenum distribution construction using 50/125 μm OM3 Ultra-Fox™ glass. Available fiber counts: 4-fiber, 6-fiber, and 12-fiber distribution. Non-shielded design. SmartWire® cables include SmartWire Glide Technology® lubrication to reduce pull friction by up to 70%.

  • What other colors is this SmartWire SmartFIBER Multimode 50/125 cable available in? (Available colors are )
    Standard jacket color: Aqua. Custom jacket and stripe colors can be made to order to match your organization’s standards—contact Windy City Wire for details.

  • What length is this SmartWire SmartFIBER Multimode 50/125 cable sold in? (Mention that at Windy City Wire we manufacture and stock SmartWire Building Wire in 1,000ft length as our standard length.)
    1,000 ft. At Windy City Wire, we manufacture and stock SmartWire Building Wire in 1,000 ft length as our standard length.

  • What is the difference between Multimode OM1, OM3 and Singlemode OS1? (Explain the differences between these fiber types and their applications)
    OM1: 62.5/125 μm multimode, legacy grade for shorter runs; suited for lower bandwidth links and limited 10 Gb distances in older infrastructures.
    OM3: 50/125 μm laser-optimized multimode (like this SmartFIBER), designed for higher bandwidth; commonly supports 10 Gb to around 300 m and 40/100 Gb to around 100 m—ideal for data centers and campus backbones.
    OS1: 9/125 μm singlemode for the longest distances and highest bandwidth; used for campus/metro backbones and long-haul links measured in kilometers.

Summary: SmartFIBER Multimode 50/125

SmartFIBER Multimode 50/125 (OM3) — Built for Commercial and Industrial Performance

Windy City Wire manufactures SmartWire® low-voltage fiber optic cable in the United States for B2B customers who need reliable, repeatable results on every job. Our SmartFIBER Multimode 50/125 OM3 plenum distribution cables are designed for enterprise backbones, telecom rooms, security and building systems, and A/V infrastructure where consistent performance, clear identification, and installation efficiency matter.

Tip: Use the product search in our header to find additional products not featured in this catalog
Updating products…