JavaScript is required to use the Windy City Wire site

DAS DragonSkin 2-Hour - Connectors

About this category

Summary: DAS DragonSkin 2-Hour - Connectors

DAS DragonSkin 2-Hour – Connectors

Windy City Wire supplies a complete DAS low-voltage cable and accessory lineup designed for reliable in‑building wireless coverage. Our DAS DragonSkin 2‑Hour category includes N‑type connectors that pair with 1/2 inch LCF12‑50 and ICA12‑50 series coax. When you choose Windy City Wire for your Distributed Antenna System project, you get a single, compatible source for DAS coax, connectors, and related low‑voltage products—helping streamline procurement, maintain consistency from end to end, and keep installations moving on schedule.

Value for your next project
- A focused, B2B product set for commercial and industrial DAS deployments, including public safety and enterprise environments.
- Connectors matched to common 1/2 inch DAS coax series for dependable terminations and a straightforward bill of materials.
- SmartWire® low‑voltage cable manufactured in the United States to support quality standards and jobsite predictability. SmartWire Glide lubrication is applied during manufacturing to reduce friction during pulls, supporting efficient installation across long vertical and horizontal runs typical in DAS.

Our DAS product and accessory offering is built to work together. From DragonSkin 2‑Hour coax to N‑type connectors, you can specify a cohesive set of products that support consistent performance and simplify field terminations across head‑end rooms, risers, and distributed antenna locations.

Where these connectors fit in DAS
Use N‑type terminations at equipment interfaces, couplers, and jumpers throughout the Distributed Antenna System. The models below are designed for 1/2 inch LCF12‑50 and ICA12‑50 series coax frequently used in public safety radio and commercial in‑building wireless systems.

Available constructions

  • N(F) Connector for 1/2" LCF12-50 Series and ICA12-50 Series
    Standard N‑type female interface for 1/2 inch LCF12‑50 and ICA12‑50 series coax. Provides a secure, equipment‑ready connection point for DAS components and jumpers.
  • N(M) Connector for 1/2" LCF12-50 Series and ICA12-50 Series
    Standard N‑type male interface for 1/2 inch LCF12‑50 and ICA12‑50 series coax. Designed for dependable field terminations and broad compatibility across DAS hardware.

Why partner with Windy City Wire for DAS
- Purpose‑built DAS low‑voltage cable and connector solutions to support consistent installations from head‑end to antennas.
- Clear, product‑first approach—no services to navigate, just the right components to build your system.
- Options across colors and configurations on SmartWire cable to align with organizational standards and identification needs.

Whether you are building out a public safety DAS or a multi‑carrier in‑building wireless system, Windy City Wire’s DAS DragonSkin 2‑Hour cable and matching N‑type connectors offer a practical, job‑ready path to consistent terminations and a smooth installation workflow.

Solutions: DAS DragonSkin 2-Hour - Connectors

DAS DragonSkin 2‑Hour – Connectors

Windy City Wire supports in‑building wireless and public safety coverage with parts that keep your distributed antenna system (DAS) performing reliably from headend to antenna. Our DAS connector options are engineered for 1/2 inch coaxial feeder lines commonly used throughout enterprise and mission‑critical environments, providing consistent mating, dependable RF performance, and a durable interface for high‑duty installation cycles. Whether you are building out a public safety DAS to meet AHJ requirements or a multi‑operator cellular DAS for LTE and 5G, selecting the right connector at each junction reduces rework, minimizes PIM risk, and helps keep projects on schedule.

Available connector constructions in this category

  • N‑Type Female (N‑F) connector designed for 1/2" LCF12‑50 and ICA12‑50 series coaxial cable
  • N‑Type Male (N‑M) connector designed for 1/2" LCF12‑50 and ICA12‑50 series coaxial cable

These N‑type connectors are widely used across DAS components—antennas, BDAs, remotes, splitters, couplers, and tappers—making them a practical choice for new builds and expansions where consistency and serviceability matter.

Where these DAS connectors and low‑voltage parts are used

  • Public safety DAS and ERRCS: Coverage for first responder radios across VHF, UHF, and 700/800/900 MHz bands in compliance with local AHJ, NFPA, and IFC requirements
  • Commercial cellular DAS: Multi‑carrier coverage for LTE and 5G NR in venues with high user density or challenging RF environments
  • Enterprise in‑building wireless (IBW): Office campuses, high‑rise buildings, and mixed‑use developments requiring consistent indoor signal
  • Healthcare: Hospitals, medical centers, and labs where reliable RF coverage supports clinical communications and life safety
  • Education: K‑12 and higher education facilities, stadiums, and residence halls with variable occupancy and heavy data usage
  • Industrial and logistics: Manufacturing plants, warehouses, distribution centers, and cold storage with large floorplates and metal structures
  • Transportation and transit: Airports, rail stations, tunnels, underground parking structures, and ports
  • Hospitality and entertainment: Hotels, casinos, convention centers, arenas, stadiums, and performing arts venues
  • Retail and public spaces: Shopping centers, big‑box retail, museums, and government buildings
  • Data centers and critical facilities: Sites requiring robust communications for operations and incident response

DAS architectures and integrations supported

  • Off‑air and base‑station fed DAS topologies (active, passive, and hybrid)
  • MIMO and single‑input/single‑output (SISO) antenna runs
  • Headend and remotes: Connections between BDAs, small cells, RRUs, POIs, and master units
  • Passive network elements: Splitters, directional couplers, tappers, attenuators, and termination loads
  • Antenna drops: Ceiling, panel, and omni antennas with N‑type interfaces
  • Transition points: Interface between 1/2" feeder lines and jumpers or equipment pigtails

Why contractors and integrators choose these DAS connectors

  • Compatibility: N‑Type Female and N‑Type Male options tailored for 1/2" LCF12‑50 and ICA12‑50 series cable used throughout DAS builds
  • Consistency across projects: Standardized connector families simplify installation practices and inventory management
  • Reliable terminations: Properly matched connectors help maintain return loss targets and reduce troubleshooting time
  • Broad ecosystem fit: Works with common DAS components and vendor equipment that specify N‑type ports
  • Support from a low‑voltage wire manufacturer focused on B2B: Assistance with part selection, takeoffs, and coordination with your RF design

Best practices for DAS connector selection and installation

  • Match connector type to the exact 1/2" coax series (LCF12‑50 or ICA12‑50) to ensure proper fit and electrical performance
  • Follow manufacturer torque specifications and use calibrated tools to maintain consistent terminations
  • Plan for connector gender at each device interface (N‑M to N‑F) to avoid unnecessary adapters in the RF path
  • Minimize the number of transitions and maintain bend radius and support to protect the feeder line
  • Validate results with line sweep and, where required, PIM testing as part of closeout documentation

Typical use cases within a DAS run

  • Connecting 1/2" feeders to BDAs, RRUs, or headend equipment with N‑type ports
  • Terminating feeder lines at passive components such as splitters and couplers
  • Creating service loops and transition points between feeder coax and low‑loss jumpers feeding antennas
  • Facilitating sectorization and MIMO branch connections with consistent N‑type interfaces

From public safety DAS to multi‑operator cellular DAS, Windy City Wire supports your end‑to‑end in‑building wireless scope with compatible connectors for 1/2" LCF12‑50 and ICA12‑50 series coaxial cable. Speak with our team to align connector selections with your RF design, equipment list, and AHJ expectations so you can deliver coverage, capacity, and code compliance with confidence.

Frequently Asked Questions: DAS DragonSkin 2-Hour - Connectors

  • What constructions are available with this SmartWire DAS DragonSkin 2-Hour - Connectors cable?

    Available constructions include N Female (N(F)) and N Male (N(M)) connectors designed for 1/2" LCF12-50 and ICA12-50 series coaxial cables.

  • What other colors is this SmartWire DAS DragonSkin 2-Hour - Connectors cable available in?

    Available colors are not specified for this category.

  • Do you stock 1/2" Coax DAS Cable?

    Yes, we stock 1/2" coax for all survivability requirements.

  • Who are Windy City Wire's valued partners in the DAS market?

    Windy City Wire is proud to partner with companies like RFS, ADRF, Westell, iBwave, GWave, RFI and others. Additional partner information can be found at https://windycitywire.com/resource-cetner/das

  • Can DAS cables be RackPacked?

    No, DAS cables cannot be RackPacked as these spools of cable are large and not conducive to being used with the SmartWire RackPack solution.

  • Do the DAS cables work with the RackPack Transportation devices?

    No, the spools are much larger than the RackPack boxes.

Summary: DAS DragonSkin 2-Hour - Connectors

DAS DragonSkin 2-Hour – Connectors

Windy City Wire supplies a complete DAS low-voltage cable and accessory lineup designed for reliable in‑building wireless coverage. Our DAS DragonSkin 2‑Hour category includes N‑type connectors that pair with 1/2 inch LCF12‑50 and ICA12‑50 series coax. When you choose Windy City Wire for your Distributed Antenna System project, you get a single, compatible source for DAS coax, connectors, and related low‑voltage products—helping streamline procurement, maintain consistency from end to end, and keep installations moving on schedule.

Tip: Use the product search in our header to find additional products not featured in this catalog
Updating products…