JavaScript is required to use the Windy City Wire site

Category Cables CAT 5e Outdoor

About this category

Summary: Category Cables CAT 5e Outdoor

Category Cables – CAT 5e Outdoor

Windy City Wire manufactures SmartWire low-voltage Category Cable for outdoor applications where reliability, labor savings, and field efficiency matter. Our CAT 5e outdoor ethernet cable options are built for harsh environments, delivering consistent 100 MHz performance with moisture-blocking construction and a durable black jacket for exterior runs. We partner directly with integrators, contractors, and distributors to supply products and solutions that streamline installation, support clean network planning, and reduce waste on every project.

Why choose SmartWire CAT 5e Outdoor

  • Built for outdoor environments: Gel-filled (flooded) cores help block moisture; black outdoor-rated jackets handle exposure and challenging conditions. Ideal for camera systems, access control, WAPs, perimeter security, parking lots, and exterior drops.
  • Consistent Category 5e performance: Bare copper conductors and tight pair geometry support 100 MHz applications and dependable PoE device power/communication across typical CAT5e distances.
  • Field efficiency by design: SmartWire Glide lubrication is applied to the cable jacket to reduce pull friction by up to 70%, helping speed installs and minimize rework in conduit and long outdoor pathways.
  • Less waste, better accountability: FastFIND Footage Markers on SmartWire cables make footage tracking and point‑to‑point length calculations simple, which can reduce indiscriminate waste and help crews get more usable cable from every box.
  • Options to match the environment: Choose non‑shielded for standard outdoor runs or shielded/direct‑burial when EMI mitigation or burial is required.
  • U.S. manufacturing and partner-focused supply: We supply the commercial and industrial market with dependable availability, technical support, and job‑ready solutions—not retail consumer products.

Available Constructions

  • 24 AWG 4 Pair Bare Copper Non-Shielded Gel-Filled Outdoor Rated Low Voltage: Flooded UTP cat5e wire designed for outdoor use with a black jacket and 100 MHz performance. Ideal for exterior conduit, outdoor runs to devices, and general-purpose environments without elevated EMI.
  • 24 AWG 4 Pair Bare Copper Shielded Gel-Filled Outdoor Rated Low Voltage: Shielded, gel-filled CAT 5e for direct burial and higher-EMI areas; outdoor high-performance construction meeting UL 444 CMX guidelines. Suitable for underground pathways and sites with nearby electrical noise.

Specification snapshot

  • Category: CAT 5e, 100 MHz
  • Conductor/Pairs: 24 AWG, 4 pair, bare copper
  • Shielding options: Non‑Shielded (UTP) and Shielded
  • Outdoor construction: Gel-filled (flooded) moisture barrier; black jacket
  • Listed for outdoor use; CMX/UL 444 references apply to shielded direct-burial construction

How SmartWire adds value to your next project

  • Plan with confidence: Clear, consistent Category 5e performance supports straightforward network planning for outdoor device drops and campus wiring.
  • Faster pulls, fewer callbacks: SmartWire Glide lubrication helps crews complete long or complex pulls efficiently with reduced jacket friction.
  • Better material utilization: FastFIND Footage Markers assist in estimating remaining cable and measuring runs, often reducing waste by double‑digit percentages across projects.
  • Brand your installs: Standard SmartWire offers a wide selection of jacket/stripe color options, and custom color requests are available to help standardize identification across jobs. Contact our team for details.
  • A partner you can trust: Windy City Wire aligns with integrators, contractors, and distributors to deliver low‑voltage products and solutions that keep schedules and budgets on track.

Typical use cases

  • Outdoor IP cameras, security gates, intercoms, and access control
  • Wireless access points and exterior building-to-building drops
  • Parking lots, campuses, warehouses, and industrial yards
  • Runs requiring outdoor ethernet cable performance with moisture blocking and optional shielding

Summary

Windy City Wire’s SmartWire CAT 5e outdoor Category Cable delivers the reliability and field efficiency professional installers expect. With moisture-blocking gel-filled cores, optional shielding and direct-burial construction, SmartWire Glide lubrication for lower pull friction, and FastFIND Footage Markers for better material control, our CAT 5e outdoor solutions help reduce labor costs and waste while supporting clean, standards‑based designs. Partner with us for dependable supply, knowledgeable support, and products engineered to perform on your next outdoor cabling project.

Solutions: Category Cables CAT 5e Outdoor

Category Cables CAT 5e Outdoor

Windy City Wire manufactures commercial-grade Category Cable solutions designed for professional installations. Our CAT 5e outdoor ethernet cable is built for reliability in exposed environments and is supported directly through integrators, contractors, and distributors. Whether you are extending a LAN between buildings, deploying IP cameras across a parking lot, or linking automation equipment in an industrial yard, this cat5e wire provides consistent performance project after project.

What defines our CAT 5e Outdoor portfolio

  • Engineered for the outdoors: A UV-resistant black jacket stands up to sun exposure and temperature changes. Flooded designs use gel filling to block moisture for long-term stability in wet or underground environments.
  • Direct-burial and conduit-ready options: Choose unshielded twisted pair (UTP) for typical outdoor runs, or shielded direct-burial for areas with higher electrical noise or when routing near power.
  • Standards-based performance: 24 AWG solid bare copper conductors, 4-pair construction, and Category 5e 100 MHz electrical performance support 10/100/1000BASE-T when installed to best practices.
  • Power for edge devices: Solid copper conductors help minimize resistance for PoE/PoE+ delivery to cameras, access controllers, sensors, and wireless access points.
  • Straightforward terminations: Standard TIA/EIA color-coded pairs streamline punch-down and RJ45 terminations in the field.

Where CAT 5e Outdoor excels

  • Security and life safety
    • IP video surveillance across campuses, parking structures, perimeters, and remote gates
    • Access control panels, door controllers, intercoms, and emergency call stations
    • Perimeter sensors and license plate recognition cameras
  • Building automation and controls
    • BAS/BMS controllers, environmental and occupancy sensors, smart lighting gateways
    • Irrigation controllers, utility meters, and outdoor IoT endpoints
  • Wireless and edge networking
    • Outdoor Wi‑Fi access points and bridges with PoE/PoE+
    • Point-to-point links between buildings within standard Ethernet distance limits
  • Pro AV and digital signage
    • Outdoor displays, kiosks, and media players in enclosures
    • Networked audio endpoints and paging systems in stadiums and campuses
  • Industrial and utilities
    • Industrial Ethernet to PLCs, HMIs, and remote I/O in yards and treatment plants
    • SCADA endpoints and monitoring stations with proper surge protection
  • Transportation and municipality
    • Traffic cabinets, parking systems, wayfinding, and smart city sensors
    • Transit hubs, rail yards, ports, and airport apron systems
  • Education, healthcare, hospitality, and retail
    • Campus inter-building connectivity, outdoor labs, and athletics facilities
    • Resort grounds, pool areas, and exterior POS or guest Wi‑Fi zones

Choosing unshielded vs. shielded

  • Unshielded (UTP): Ideal for typical outdoor runs in conduit or open-air routes away from heavy electrical noise. Streamlined installation and termination.
  • Shielded, direct-burial: Adds a protective layer for electrically noisy environments, aerial-to-ground transitions (where permitted), or long parallels to power. Recommended when burying without conduit and when additional EMI mitigation is required. Ensure bonding/grounding practices are followed.

Installation and network planning considerations

  • Distance and performance: Plan for standard Ethernet channel limits and test links to verify Category 5e 100 MHz performance.
  • Route selection: Use conduit where mechanical protection is needed; select shielded direct-burial for soil contact and moisture-prone areas.
  • Code compliance: Transition to the appropriate indoor-rated cable at the building entrance as required by local code. Follow grounding and bonding requirements for shielded cable and use surge protection for exposed outdoor runs.
  • PoE budgeting: Account for voltage drop on long runs and total device power draw. Solid bare copper helps maintain power delivery; verify with your PoE budget calculations.
  • Termination and testing: Use connectors rated for solid 24 AWG and verify each link with certification testing to document performance.
  • Environmental factors: Consider UV exposure, temperature swings, water ingress, rodent risk, and vehicle traffic. The flooded gel core and robust jacket help protect against moisture and outdoor conditions.

Applications by system type

  1. IP Surveillance: PoE cameras, PTZ units, call boxes, analytics sensors—ideal for lots, garages, and perimeters.
  2. Access Control: Edge controllers, readers, intercoms, and gates with reliable data and power over a single Category Cable.
  3. Wireless Infrastructure: Outdoor APs, bridges, and mesh nodes for courtyards, stadiums, and campus greens.
  4. Automation and IoT: Weather stations, leak detectors, lighting controllers, and metering endpoints.
  5. AV and Signage: Exterior displays, audio endpoints, and kiosks that require stable connectivity and PoE.

Built to support professional projects

  • Consistent, solid bare copper conductors for predictable electrical characteristics
  • Options for unshielded or shielded direct-burial to match site conditions
  • Documentation and technical support for design, submittals, and commissioning

As a manufacturer focused on commercial and industrial markets, Windy City Wire works directly with integrators, contractors, and distributors. If your next outdoor deployment calls for dependable cat5e wire, our CAT 5e Outdoor Category Cable helps simplify installation and long-term maintenance while meeting performance requirements. Contact our team for assistance with product selection, specifications, and network planning for your application.

Frequently Asked Questions: Category Cables CAT 5e Outdoor

  • What AWG conductors are available with these SmartWire Category CAT 5e Outdoor sables?

    These outdoor ethernet cable options are available in 24 AWG, 4-pair bare copper (CAT5e). Choose from unshielded (UTP) or shielded, gel-filled direct-burial constructions to match your network planning needs.

  • What other colors are these SmartWire Category CAT 5e Outdoor cables available in?

    These CAT5e outdoor cables feature a black outer jacket for durability. Inside the cable, the standard pair identification colors are:

    • White-Blue/Blue
    • White-Orange/Orange
    • White-Green/Green
    • White-Brown/Brown

    SmartWire can also be manufactured with customized jacket and stripe color combinations to help standardize installations—contact Windy City Wire for details.

  • Are these SmartWire Category CAT 5e Outdoor cables made with solid or stranded copper conductors?

    They use solid bare copper conductors, ideal for permanent structured cabling runs. (Stranded conductors are typically used for patch cords, not bulk outdoor cat5e wire.)

  • What lengths are these SmartWire Category CAT 5e Outdoor cables sold in?

    Windy City Wire manufactures and stocks SmartWire Category Cable wire in 1,000 ft length as our standard length.

  • How is your SmartWire low-voltage Category Cable cables sold on spools or in boxes?

    SmartWire cable is packaged in our patented RackPack carton as part of our complete RackPack Field Systems Solution that improves safety and efficiency while helping reduce labor costs.

    Learn more about our RackPack: https://windycitywire.com/solutions/rackpack-overview

  • What are the main differences between CAT5e, CAT6, CAT6A, and CAT7 cables?
    • CAT5e: Up to 1 Gbps at 100 meters; 100 MHz bandwidth; commonly UTP; excellent for basic data and VoIP; outdoor versions (like gel-filled/flooded) are available for moisture resistance.
    • CAT6: Up to 1 Gbps at 100 meters; supports 10 Gbps to about 37–55 meters; 250 MHz bandwidth; tighter twists and separator options reduce crosstalk.
    • CAT6A: 10 Gbps up to 100 meters; 500 MHz bandwidth; improved alien crosstalk control; often larger OD and may use shielding in noisy environments.
    • CAT7: 10 Gbps up to 100 meters; 600–1000 MHz bandwidth; typically individually shielded pairs and overall shield; commonly aligned to ISO/IEC Class F (not a TIA/EIA category) and may require non-RJ45 connectors; chosen for very high EMI environments.

    For most modern enterprise network planning, CAT6A is the go-to for new builds needing 10G over full distances; CAT5e remains a cost-effective option for 1G links.

  • What are some popular Category Cable colors and what do they stand for?

    Color conventions vary by organization, but common practices include:

    • Blue: General data drops
    • White: Office/user workstations or general purpose
    • Gray: Standard patching
    • Red: Critical systems, DMZ, or security devices
    • Yellow: PoE devices, cameras, or video
    • Green: Cross-connects or management networks
    • Orange: Demarcation, ISP handoff, or special circuits
    • Purple/Violet: Voice/VoIP
    • Black: Outdoor or security applications

    Agree on a site-specific color standard during network planning for consistent Category Cable identification.

Summary: Category Cables CAT 5e Outdoor

Category Cables – CAT 5e Outdoor

Windy City Wire manufactures SmartWire low-voltage Category Cable for outdoor applications where reliability, labor savings, and field efficiency matter. Our CAT 5e outdoor ethernet cable options are built for harsh environments, delivering consistent 100 MHz performance with moisture-blocking construction and a durable black jacket for exterior runs. We partner directly with integrators, contractors, and distributors to supply products and solutions that streamline installation, support clean network planning, and reduce waste on every project.

Tip: Use the product search in our header to find additional products not featured in this catalog
Updating products…